How to safely operate the CNC hydraulic press brake bending machine?

CNC hydraulic press brake bending machine is a kind of bending machine. Its main role is in the metal processing industry. Products are widely used in the light industry, aviation, shipping, metallurgy, instrumentation, electrical appliances, stainless steel products, steel construction, and decoration industry. CNC hydraulic press brake bending machine is currently the first choice of sheet metal processing machinery for plate material, especially large plate material, by matching a variety of different molds, you can bend the edge of the plate material, stretching, pressing round, punching, etc.

Here is the content:

• Before the operation

• During an operation

• After the operation

Before the operation

Strictly abide by the safe operating procedures of the CNC hydraulic press brake bending machine, and wear labor protective equipment as required. Before starting, you must carefully check the motor, switch, wiring and grounding are normal and solid, check the equipment manipulation parts, buttons are stalled in the correct position. Also, check the overlap and sturdiness of the upper and lower dies: check whether the positioning devices meet the requirements of the processed products. After the equipment is started, the slider moves a few times with full stroke. If an abnormal sound or fault is found, it should be stopped immediately, and the fault will be eliminated, and it can work after everything is normal.

During an operation

Work should be unified command by one person so that the operator and the feeding and pressing personnel work closely together to ensure that the cooperation of personnel is in a safe position before sending bending signals. Adjust the plate material press die must be cut off the power supply, stop running after. When the workpiece or mold is found to be incorrect during operation, it should be stopped and corrected, and it is strictly forbidden to correct by hand during operation to prevent injury to the hand. Abnormalities occur immediately shut down, check the causes, and promptly eliminate.

After the operation

The hydraulic press brake bending machine needs regular maintenance, and maintenance should also be operated in accordance with certain regulations, which are conducive to the operation of mechanical equipment. At the same time, according to the corresponding equipment safety technical performance of the relevant requirements to maintain, can effectively ensure the durability of the equipment and the biggest safety problem of personnel. In the machine tool protection or wipe machine before, it should be aligned with the upper die lower die and put down the machine off until the end of the operation. If you need to start or other operations, the form should be selected in manual, and ensure safety. It is necessary to check the oil level of the tank every week. If the oil level is lower than the oil window, hydraulic oil should be added. The air filter on the oil tank, every 3 months to check the removal, at the latest 1 year to replace.

If you are not able to standardize the use of a CNC hydraulic press brake bending machine, it may cause the craft to be fine and damage the interests of customers. Seriously even leads to employee casualties and other tragedies. Therefore, reasonable and standardized use of hydraulic bending machines is important and can not be ignored. ZC-power's CNC hydraulic bending machinecan effectively ensure the durability of the equipment and the maximum safety of personnel.