Views: 329 Author: Site Editor Publish Time: 2021-09-29 Origin: Site
A hydraulic shearing machine is a kind of machine which is separated by the movement of the upper blade and the fixed lower blade, using a reasonable gap between the blades.
Here is the content:
Shearing hydraulic guillotine shear machine operating procedures
Shearing hydraulic guillotine shear machine use precautions
First: carefully implement the "forging equipment through the operating procedures" relevant provisions.
Second: conscientiously implement the following additional provisions:
1, Before working seriously to:
1), Before the air rotation test run, we should first use the manual disk car a working stroke, to confirm normal before starting the equipment.
2) Check the amount of oil in the reservoir should be sufficient for the equipment with the hydraulic device. After starting the pump, check valves and piping for leaks, pressure should meet the requirements. Open the bleeder valve to bleed off the air in the system.
2, After work, operator should be the upper knife plate down on the bottom position.
Before operating to wear tight protective clothing, cuffs fastened, the hem of the upper garment can not be open, shall not be in the open hydraulic guillotine shear machine tool next to wear, take off and change clothes, or surrounded by cloth on the body to prevent hydraulic guillotine shear machine strangulation. Operators must wear helmets, braids must be stuffed into hats, skirts and slippers are not allowed.
Shearing hydraulic guillotine shear machine is suitable for the shearing material thickness of the hydraulic guillotine shear machine tool rated for a variety of steel plates, copper plates, aluminum plates, and non-metallic material plates, and must be no hard marks, welding slag, slag, welding seam materials, not allowed to super-thickness.
The use of shearing hydraulic guillotine shear machine: according to the thickness of the material to be cut, adjust the gap between the blades; according to the width of the material to be cut to adjust the mold or fixture; shear operation before the first 1-3 times empty trip, normal before the implementation of shear work.
Use such as the discovery of hydraulic guillotine shear machine operation is not normal, operator should immediately cut off the power shutdown to check.
When adjusting the hydraulic guillotine shear machine, the power must be cut off, when moving the workpiece, one should pay attention to the safety of the hands.
Shearer ministries should often maintain lubrication, each class by the operator to refill the lubricant once every six months by the mechanics of the rolling bearing parts to refill the lubricant once.
1, Start the shearing hydraulic guillotine shear machine for several idle cycles, to ensure that under normal circumstances, and try to cut different thicknesses of plate material, from thin to thick. Ensure that the user is familiar with the performance of the shearing hydraulic guillotine shear machine.
2, Test shear different plate thickness must be adjusted to different blade clearance. If you do not adjust the corresponding blade gap, it affects the durability of the blade.
3, Shear in the shearing process to open the pressure gauge switch, observe the oil pressure value, and cut 12mm plate pressure should be less than 20MPa. this remote regulator No9, the factory pressure adjustment 20-22MPa, the user must comply with this provision, not to cut super specified material surface to increase pressure, resulting in hydraulic guillotine shear machine damage.
4, The sound balance during operation. Shearing hydraulic guillotine shear machine such as noise, should stop to check.
5, Shearing hydraulic guillotine shear machine operation when the oil tank raises the temperature by fewer than 60 degrees, more than when the hydraulic guillotine shear machine is shut down to rest.
It was this environment that led us to create more and better shearing machines. ZC-power is now offered as the most elaborate product while maintaining the right price. Browse through the products we offer, and you will see what we mean. Please contact us on 0086-15852949220 to order or receive answers to any of our questions.
