Views: 311 Author: Site Editor Publish Time: 2021-10-11 Origin: Site
The bending of the plate mainly requires the use of a press brake machine, which can automatically determine and recognize the plate, and bend the plate according to the parameters set by the user. Before using the press brake machine, we need to learn the installation method to facilitate future use, so what are their installation methods? What are their purchasing standards? Next, let's take a look at the installation adjustment and purchase standard of the press brake machine. Here are some answers.
Here is the content list:
Installation and adjustment of press brake machine.
Selection criteria for press brake machine.
First, the adjustment of the machine. Before installing, adjust the performance of the press brake machine. This process must be carried out patiently and conscientiously, check whether the press brake machine has dust and used iron scraps, etc. And perform necessary cleaning to reduce the trouble in the later stage. Second, the adjustment of the slider stroke. Pay attention to the checked thickness and check whether the ratio of the upper and lower modules is normal. Normally, the module should be controlled at the switch point of the stroke line. This point must be paid attention to.
Third, the adjustment of the stroke module. That is to adjust the upper limit point of the module. When the module is up to the height, set the switch and reserve the position of the slider. At the same time, the deceleration module must be installed when going down to better protect the press brake machine. Fourth, the adjustment of the gap. It is mainly to measure the distance between the upper module and the lower module first, and the specific gap setting is determined according to the folded plate.
First, the new press brake machine must be flexible. The wider the range of parts and the more types, the more requirements the machine has to meet in terms of flexibility. The software and hardware operations must be very simple, even in the case of frequent changes in orders and seldom repetition, the adjustment time can be shortened as much as possible.
Second, it involves the accuracy of the press brake machine system when it works. The error of the bending angle is unavoidable in physics, so the important thing is how much deviation the user can accept. Simple parts sometimes have lower accuracy, but most parts often require high accuracy, especially in the case of further processing after bending.
Third, it is necessary to determine the production capacity and specifications of the press brake machine. Starting from the size range of the parts, the pressure, bending length, stroke, and structural height should be measured.
ZC-power mainly produces press brake machines, industrial press brakes, manual press brakes, magnetic press brakes, etc. If you want to buy our company's products, you can communicate with us on the website. Our official website is https:// www.zczgmachine.com/.
