Introduction and safe operation steps of CNC press brake

The CNC press brake is to uses the equipped mold to bend the cold metal sheet into various geometric cross-sectional shapes. It's a sheet forming machine designed for cold-rolled sheet process and is widely utilized in sheet bending processes in industries like cars, craft producing, lightweight trade, building, containers, elevators, and railway vehicles. Next, let's take a look at the introduction and safe operation steps of the CNC press brake. Here are some answers.

Here is the content list:

• Introduction of CNC press brake.

• Safe operation steps of CNC press brake.

Introduction of CNC press brake.

Press brake generally adopts a special CNC system for press brake. The coordinate axis of the press brake has been developed from a single axis to 12 axes. It's a sheet forming machine designed for cold-rolled sheet process and is widely utilized in sheet bending processes in industries like cars, craft producing, lightweight trade, building, containers, elevators, and railway vehicles. Pressure tonnage adjustment and slider approaching speed adjustment, etc. The CNC press brake can easily realize the actions of slide down, jog, continuous, pressure holding, return, and halfway stop, and can bend multiple elbows of the same angle or different angles in one feeding.

Safe operation steps of CNC press brake.

First, strictly abide by the CNC press brake safety operating procedures, and wear labor protection equipment as required. Second, before starting, you must carefully check whether the motor, switch, circuit and grounding are normal and firm, and check that the control parts and buttons of the equipment are stuck in the correct position. Third, check the overlap and firmness of the upper and lower molds; check whether each positioning device meets the requirements of being processed. Fourth, when the upper sliding plate and each positioning axis are not at the origin, run the return-to-origin program. Fifth, after the CNC press brake is started, it will run idling for 1 to 2 minutes, and the skateboard will move at full stroke 2 to 3 times. If any abnormal sound or malfunction is found, stop right away, troubleshoot the malfunction, and work when everything is traditional. Sixth, when the CNC press brake is working, one person should command it uniformly, so that the operator and the feeding and pressing personnel cooperate closely and ensure that the cooperating personnel is in a safe position before sending the bending signal.

Seventh, the sheet metal must be compacted when bending, to prevent the sheet metal from lifting and hurting people during bending. Eighth, the CNC press brake power must be cut off when adjusting the sheet material and die, and proceed after stopping the operation. Ninth, when changing the opening of the variable lower mold, no material is allowed to contact the lower mold. Tenth, when working, no one is allowed to stand behind the machine tool. Eleventh, it is strictly forbidden to fold the sheet at one end alone. Twelfth, if the workpiece or mold is found to be incorrect during operation, stop the machine for correction, and it is strictly forbidden to make a manual correction during operation to prevent hand injury. Thirteenth, it is forbidden to fold over-thick iron plates or hardened steel plates, high-grade alloy steels, square steels, and plates that exceed the CNC press brake performance of the plate to avoid damage to the machine tool.

Our official website is https:// www.zczgmachine.com/. For more CNC brake machine-related questions, please contact us.