Introduction of CNC punching and bending machine

In modern industrial production, CNC punching and bending machine, as the key equipment for modern processing of all kinds of flat holes, uses new forming technology to process holes. Its high precision, accurate positioning and short production cycle, and replace the traditional equipment. Let's learn more about the CNC punching and bending machine.

Here is the content:

• Compared with the ordinary

• Matters need attention

• Compared with drilling machines and punching machines

Compared with the ordinary

CNC punching and bending machine processing and ordinary punching machine processing are the same in processing principle, but the whole process of CNC processing is carried out fully automatically. There is no programming problem to be considered when working with ordinary punching machines. Generally, only consider the arrangement of knife point, knife route, knife change point and working step. In numerical control processing, the relevant program content has been programmed, so CNC punching and bending machine has the characteristics of the correctness and rationality of the processing program. Its requirements are very high, do not allow the slightest error, otherwise it will not be processed out of the normal qualified parts.

Matters need attention

Before working, please carefully check whether the grid voltage, lubrication, and oil quantity are normal, check whether the tool, oil pipe, pressure, and cooling are intact, and also pay attention to the regular maintenance work. When operating the punching machine, make sure not to put your hand into the mold to avoid harm to the human body. In the process of operation, such as the need to adjust the pressure, stroke, clamping tools and workpiece, and wipe the equipment must be in the shutdown state. Special keys must be used when loading and unloading the mold, and hand hammer cannot be used to prevent the deformation of the central shaft.

Compared with drilling machines and punching machines

Drilling is the process of drilling a hole in the processed material with a drill bit, while punching is the process of making a hole by gravity with a drill bit. Punching machines are suitable for processing soft materials because holes drilled by drilling machines will have burrs and be uneven. A drilling machine is suitable for processing hard materials because the punching force of a punching machine tends to crack the processed material.

The processing objects of punching machines and hole punching machines are largely similar. Punching machines are divided into ordinary punching machines, fast punching machines, etc. Since punching machines require a feeding system, they are generally large. CNC punching and bending machine is a further development of punching machine, which solves the problem of punching machine needing an independent feeding system, so it is smaller in size.

Zc-power is a high-tech modern company which mainly produces special machinery and complete sets of equipment for bending machines and plate shearing machines. Companies complete varieties, specifications of many products, adhering to the scientific management concept, adopting advanced technology, intelligence to create a brand. Technology has matured. And the intelligent degree of automatic diagnosis is very high. Therefore, ZC-POWER CNC punching and bending machine is an ideal choice.