Mechanical damage of press brake machine

Mechanical injury refers to a mechanical accident that occurs when the mechanical energy is accidentally released. There are many sources of danger, and it is also the most vulnerable to injury for the operator of the press brake machine during the production process. Next, let's take a look at the mechanical damage of the press brake machine. Here are some answers.

Here is the content list:

• The operator of the press brake machine was injured by the machine.

• The problem of mechanical damage occurred in the process of press brake machine operation.

The operator of the press brake machine was injured by the machine.

The operator of the press brake machine should not stretch a certain part of his body between the upper and lower molds under any circumstances, such as when he stretches his hand between the upper and lower molds to adjust the positioning. Because when the operator puts his hand between the upper and lower molds, the upper mold or the rear positioning of the press brake machine may collide with their hands, thereby posing a threat to personal safety.

When the press brake machine is in use, the switch is controlled by the foot, and the parts are pushed by hand, and the upper and lower molds are moved under the action of hydraulic pressure, to achieve the requirements for the bending of the parts. When bending small parts or the size of the parts is smaller than the upper die of the bending machine, due to the incorrect bending gesture, the operator's hand will be clamped between the upper die and the part inadvertently.

When two people are operating the press brake machine, if the two-foot switches are not turned on, it may happen that one person has started to step on the footswitch and the other is still adjusting the position of the part, causing the part to scratch the operator and the part to hit the operator's chin situation. In addition, in the process of pushing parts, because the edges of some parts may be relatively sharp, the hand of the inspector may be scratched.

The problem of mechanical damage occurred in the process of press brake machine operation.

Due to the wide variety of parts in the bending operation, when the processing size of the parts is large or too heavy, two people need to cooperate to complete the product bending operation. Two operators are required to push the product to the designated position at the same time. When pushing the parts, two people must complete it at the same time. There are great requirements for the ability of the operators to cooperate with the press brake machine. The probability increases and the parts are very likely to collide with their head during the process of descending, thereby posing a threat to life and safety.

During the entire operation of the press brake machine, it is also necessary to avoid excessive stacking of materials on the press brake machine, which may cause parts to fall and hurt legs or feet. In addition, when placing materials, do not place them too close to the press brake machine to prevent the parts from scratching the workers when they turn around.

If you want to buy a press brake machine, you can communicate with us on the website. Our official website is https:// www.zczgmachine.com/.