Views: 328 Author: Site Editor Publish Time: 2021-10-28 Origin: Site
For the production management personnel of the enterprise, during the entire production process, not only should pay attention to the safety of the operators of the sheet metal press brake, but also conduct a comprehensive inspection of the hazards affecting the sheet metal press brake, and propose the corresponding Safety protection measures escort the safety of front-line workers in the workshop. Next, let's take a look at the safety protection analysis of the press brake machine. Here are some answers.
Here is the content list:
Analysis of protection against mechanical damage.
Analysis of protection against electrical injuries.
Judging from the prior protection work, the press brake machine operator must do a series of protection work before proceeding. For example, wear non-slip shoes, gloves, and helmets. In addition, the operators in the previous process must deburr the large burrs on the bending parts. In addition, it is necessary to ensure the safety of the placement of the parts to be bent and the completed parts and the protection of the parts, the operator must pay attention to keeping the man-machine synchronization, and the bending work area is separated by guardrails. More importantly, in the safety management of the bending process, visual management emphasizes that the various safety management status and management methods are clear so that it is easy to understand and follow, allowing employees to fully understand, accept and implement safety protection measures on their own.
On the top of the press brake machine, an information board for dangerous sources at the bending production site was posted. The board pointed out the hidden safety hazards in the bending work area and pointed out that improper operation of the press brake machine could easily cause damage to the operators themselves and the parts handling process. Injury to other people passing by. The analysis of the hazard sources in the bending operation area pointed out that the main reasons are that the door panels and other parts are longer and heavier, the parts are raised and lowered too fast during bending, and the operator does not pay attention to the presence of people behind the press brake machine.
Operators of press brake machines must wear insulation equipment when conducting electrical inspections. During the inspection, illegal operations are strictly prohibited. When checking the electrical insulation and equipment grounding, you must carefully check in advance whether the wire is damaged or leaking. Once you find such a situation, you need to stop the inspection immediately. Secondly, when checking the circuits and meters, make sure that the power supply is in a disconnected state. To reduce the risk of inspection, red warning signs must be posted on the surrounding guardrails. During the inspection, try not to use temporary power and circuits to prevent leakage and fire.
It is necessary to post comics and text descriptions of the safety precautions for bending operations on the top of the press brake machine, as well as the switch status indication of the photoelectric device of the press brake machine to increase the effect of management. In short, there are many hidden safety hazards in the production process of the bending process. We must have full knowledge and understanding of the existing hazards and take the initiative to protect ourselves. Only in this way can production and work be carried out based on ensuring their safety.
For more press brake machine-related questions, please feel free to contact us. Our official website is https:// www.zczgmachine.com/.
