The concept and operating procedures of CNC shearing machine

CNC shearing machine generally adopts general-purpose or special-purpose computer to realize digital program control, which usually controls mechanical quantities such as position, angle, speed, and switch quantities related to the direction of mechanical energy flow. Next, let's take a look at the concept and operating procedures of the CNC shearing machine. Here are some answers.

Here is the content list:

• The concept of CNC shearing machine.

• Operating procedures of CNC shearing machine.

The concept of CNC shearing machine.

CNC shearing machine refers to a technical machine that realizes the motion control of a shearing machine or multiple shearing machines through digital instructions composed of numbers, characters, and symbols. The production of CNC shearing machines relies on the appearance of data carriers and binary data operations.

Operating procedures of CNC shearing machine.

Do it carefully before work: first, before the dry run test run, you should use a manual crank for a working stroke, and then start the CNC shearing machine after confirming that it is normal. Second, the equipment with hydraulic equipment, check the oil storage tank should be sufficient. Once beginning the pump, check the valve and pipeline for discharge, and therefore the pressure ought to meet the necessities. Open the air unleash valve to unleash the air within the system.

Be careful in work: first, do not cut laminated sheets, do not trim the edges of raw sheets, do not cut narrow sheets and short materials that are not tightly compressed. Second, the gap between the blades should be adjusted according to the thickness of the plate, but it should not be greater than one-thirtieth of the thickness of the plate. The knife plate ought to be fixed firmly and therefore the higher and lower knife plates ought to be unbroken parallel. When adjustment, manual turning ought to be used for scrutiny to avoid accidents. Third, the innovation of the blade ought to be unbroken sharp. If the forefront becomes uninteresting or cracked, it has to be compelled to get replaced in time. Fourth, once cutting, the pressing device ought to firmly press the sheet, and it's not allowed to chop while not being tightly ironed. Fifth, for CNC shearing machines with hydraulic devices, other hydraulic valves are not allowed to be adjusted privately except for throttling. Sixth, the thickness of the sheet sheared by the hydraulic shearing machine should be determined according to the "Graph of Relationship between Ultimate Strength and Thickness of Sheets". Finally, after work, the upper knife board should be dropped to the lowest position.

ZC-power mainly produces bending machines, CNC shearing machines, punching machines, knives, etc. The products are sold throughout the country and Southeast Asia. Our official website is https:// www.zczgmachine.com/. If you want to learn more about our company, you can communicate with us on the website. Our company adheres to the corporate culture of "quality-oriented, customer first", and has always made unremitting efforts to become a professional CNC shearing machine supplier in the industry.